Product Introduction
Composition Lithium silicate, potassium silicate as the base material, adding metal zinc powder, additives and other components.
It is packed in A and B double-component.
Characteristics The paint film contains a large amount of zinc powder, with cathodic protection, excellent antirust property, good adhesion, oil resistance and resistance to oil.
Good adhesion, good oil and water resistance, good dryness, excellent high temperature resistance, no influence on welding performance.
Temperature resistance, no shadow welding performance, excellent low temperature curability, paint film resistance, impact resistance, abrasion resistance, solvent resistance.
Impact resistance, abrasion resistance, solvent resistance. It can be widely used as the primer of steel pretreatment line in shipbuilding factories, heavy machinery factories, etc. It can also be used as the primer of offshore platforms, shipyards and shipyards.
It can also be used for high performance antirust paint for offshore platforms, wharves, steel supports in mines, bridges and large steel structures.
It can also be used in offshore platforms, wharves, steel supports in mines, bridges and large steel structures as high-performance antirust paint.
Painting method Brushing, rolling, spraying are available.
Diluent Inorganic zinc-rich anticorrosive paint special diluent.
Drying time 23±2℃ surface drying ≤10 minutes, drying ≤12 hours, fully cured 7 days.
Surface treatment The surface of steel should be descaled by hand up to St3 level, and descaled by spray up to Sa2.5 level.
After coating Epoxy resin coating, chlorinated rubber coating, polyurethane coating, high chlorinated polyethylene coating, etc.
Note 1: Inorganic zinc-rich anticorrosion coating should be dried at room temperature for at least 7 days before it is put into use.
3、No open-air construction in rain, fog and snow.
It is packed in A and B double-component.
Characteristics The paint film contains a large amount of zinc powder, with cathodic protection, excellent antirust property, good adhesion, oil resistance and resistance to oil.
Good adhesion, good oil and water resistance, good dryness, excellent high temperature resistance, no influence on welding performance.
Temperature resistance, no shadow welding performance, excellent low temperature curability, paint film resistance, impact resistance, abrasion resistance, solvent resistance.
Impact resistance, abrasion resistance, solvent resistance. It can be widely used as the primer of steel pretreatment line in shipbuilding factories, heavy machinery factories, etc. It can also be used as the primer of offshore platforms, shipyards and shipyards.
It can also be used for high performance antirust paint for offshore platforms, wharves, steel supports in mines, bridges and large steel structures.
It can also be used in offshore platforms, wharves, steel supports in mines, bridges and large steel structures as high-performance antirust paint.
Painting method Brushing, rolling, spraying are available.
Diluent Inorganic zinc-rich anticorrosive paint special diluent.
Drying time 23±2℃ surface drying ≤10 minutes, drying ≤12 hours, fully cured 7 days.
Surface treatment The surface of steel should be descaled by hand up to St3 level, and descaled by spray up to Sa2.5 level.
After coating Epoxy resin coating, chlorinated rubber coating, polyurethane coating, high chlorinated polyethylene coating, etc.
Note 1: Inorganic zinc-rich anticorrosion coating should be dried at room temperature for at least 7 days before it is put into use.
3、No open-air construction in rain, fog and snow.